Anything to do with mechanical, construction etc


Postby jtsarby » Thu May 26, 2011 3:34 pm

I read on another build thread where someone used aluthane. It looked like good stuff so I decided to bite. Well, today I applied the aluthane. So far I am impressed. The consistency is somewhere between stain and paint. I rolled it on and it both penetrated and coated the wood. It was very easy to work with however you will need a respirator. It is potent stuff. Also, wear gloves. If it gets on your hands they will be sealed really well :). The instructions mention that if you open it and reseal it the top will get stuck. They don't lie. It took 30 minutes to get the top off. The true test will be how it stands up to the elements. So far so good.
Teardrop Builder
Posts: 33
Images: 15
Joined: Sun Feb 28, 2010 5:34 pm

Postby droid_ca » Thu May 26, 2011 5:57 pm

I've read alot of good things about it
good to here from someone who is using it
and not affiliated with the company
There is a world, just beyond now,
where reality runs a razor thin seam between fact and possibility;

Anywhere I roam where I lay my head is home....
“Fide Canem”
Please check out my build thread
User avatar
Donating Member
Posts: 1981
Images: 176
Joined: Thu Sep 30, 2010 5:08 am
Location: Prince George BC Canada

Postby MKE_Tear » Fri May 27, 2011 4:49 am

Nice to see someone else using it!!

I used it on my build last year. Although I'm not completely finished with it (my camper), so I haven't had my maiden voyage yet alone any tests with bad weather, I think it will do fine.

Saying the "consistency is somewhere between stain and paint" is dead on.

All the best!
User avatar
Teardrop Master
Posts: 130
Images: 243
Joined: Sat May 08, 2010 6:28 pm
Location: Milwaukee, WI

Re: Aluthane

Postby annalex » Sun Oct 27, 2019 7:08 am

I've used aluthane with pretty decent results. Can't get much better than an all-in-one paint, anti-corrosive, rust prevention and sealer!
Teardrop Inspector
Posts: 2
Joined: Wed Sep 04, 2019 2:07 am

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 6 guests