A different hatch for the weekender

Anything to do with mechanical, construction etc

A different hatch for the weekender

Postby les45 » Sat Feb 01, 2020 10:34 am

It's been seven years since I built my weekender (Super Bee) and I haven't seen where anyone has tried to steal my "innovative" tailgate hatch so I thought I would throw it out as a reminder. I created a tailgate style hatch to eliminate the large bulky one piece hatch that created issues with weight and sometimes got in the way of the galley when raised. My tailgate hatch was very simple to build and seal and much easier to set up when camping. Here are a few pics:

The hatch was basically in two pieces. The light weight top hinged up on a hurricane hinge and was supported with a simple piece of 1/2" electrical conduit on each side. The rear tailgate portion simply folded down flat providing easy access to the galley area.
Image

The two pieces closed tightly with simple seals and were totally watertight. The rear tailgate locked in place with a simple barrel bolt on each side inside the galley area. The top was held down with three draw latches fastened to the tailgate. (and yes those are dual exhausts in keeping with the original Dodge Super Bee name)
Image

The simple galley had a two piece plywood countertop that would slide over each other or both could be simply lifted out for access to storage below. The storage area was used for coolers, camp stove, and cooking gear.
Image

Side view.
Image

If anyone is interested in this type of hatch, you can see all the construction details with lots of pics at my journal: http://tnttt.com/viewtopic.php?f=50&t=49333
Feel free to message me if you have any questions.
User avatar
les45
500 Club
 
Posts: 941
Images: 588
Joined: Sat Feb 25, 2012 8:57 am
Location: Aiken, South Carolina

Re: A different hatch for the weekender

Postby lfhoward » Sat Feb 01, 2020 11:46 am

Les, this is a very cool design. If I were building another trailer that had a galley, I would totally consider doing it like that. My trailer now has a rear door and no galley, although it does have an angular design. :thumbsup:
My off-road camper build on an M116A3 military chassis:
http://www.tnttt.com/viewtopic.php?f=50&t=62581
Tow vehicle: 2008 Jeep Liberty with a 4 inch lift.
User avatar
lfhoward
500 Club
 
Posts: 593
Joined: Wed Jan 22, 2014 6:10 pm
Location: Philadelphia, PA

Re: A different hatch for the weekender

Postby S. Heisley » Sat Feb 01, 2020 8:05 pm

Thank you, Les. All your trailers have been beautifully built and nicely thought out. :thumbsup:
User avatar
S. Heisley
Super Lifetime Member
 
Posts: 8349
Images: 491
Joined: Mon Sep 17, 2007 10:02 am
Location: No. California
Top

Re: A different hatch for the weekender

Postby tony.latham » Sat Feb 01, 2020 10:15 pm

:thumbsup: :thumbsup:

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 4121
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 1 guest